Stainless Steel Eye Bolts & Stainless Steel Nuts China Manufacturers

Our eye bolts are made of stainless steel, which is often used in marine applications for its increased resistance to chloride corrosion. However, their strength and corrosion protection also makes them desirable for a wide range of environments.

DIN standard includes din580 lifting eye bolts and din582 lifting nuts. Shoulder eye bolts can be used for either straight lines or angular pulls. Lag eye bolts have wood screw threads, and are excellent for a number of applications both inside and outside. Stainless steel eye nuts are commonly used in shade structures, wire balustrades, architectural rigging, wire rope, and marine and general-purpose applications. Others you can find below.

 Products

Trawling Gear

 

Lifting & Rigging

 

Stainless Steel Products

 

Shade Sail Hardware 

Stainless Shackles 

Stainless Turnbuckle 

Stainless Eye Bolts & Nuts 

 Lifting Eye Bolt DIN 580 UNC Thread Stainless Steel

 Lifting Eye Nut DIN 582 UNC Thread Stainless Steel

 Stainless Steel Long Shank Eye Bolt with Nut and Washer

 Lifting Eye Bolt DIN 580 Stainless Steel

 Lifting Eye Nut DIN 582 Stainless Steel

 Stainless Steel Eye Bolt JIS 1168 Standard

 Stainless Steel Lifting Eye Nut JIS 1169 UNC Thread

 Stainless Steel Lifting Eye Nut JIS 1169

 Stainless Steel Shoulder Eye Bolt UNC Thread with Nut and Washer

 Stainless Steel Forged Shoulder Nut Eye Bolt G-277

 Regular Nut Eye Bolts G-291 Stainless Steel-LG RIGGING®

 Shoulder Type Machinery Eye Bolt Stainless Steel G-279

 Stainless Steel Lag Eye Bolt

 Stainless Steel Lag Eye Screw

 Stainless Steel Eye Bolt Unwelded

 Stainless Steel Swing Eye Bolt UNC Thread

 Stainless Steel Ring Eye Bolt

 Stainless Steel Welded Eye Bolt with Nut & Washer

 DIN444 Eye Swing Bolts Stainless Steel

Stainless Thimbles 

Stainless Rings 

Stainless Swivels 

Stainless Quick Link 

Stainless Wire Clips 

Stainless Hooks & Clips 

Stainless Terminals 

Stainless U Bolts 

Stainless Hinge 

Stainless Pulleys 

Drop Forged Stainless Products 

Stainless Chains 

Eye Plate, Eye Straps, Angles 

Boat Fittings

 

Pole Line Hardware

 

Types of Stainless Eye Bolts & Nuts

Stainless Steel Ring Eye Bolt

Stainless Steel Welded Eye Bolt with Nut & Washer

DIN444 Eye Swing Bolts Stainless Steel

Types and styles of Stainless Eyebolts and nuts

Stainless Eyebolts and nuts are one of the most common pieces of hardware used in lifting and rigging and consist of a threaded shank with an eye at one end. In this way, the lifting eye is used as a connection point to other hardware and a wire rope or sling is passed through the eye to lift the object.

Stainless Eyebolts and nuts are available in both rated eye bolt and non-rated eye bolt styles. rated eye bolt is one that has been certified by an independent laboratory and is of the highest possible quality and rated working load as indicated. A non-rated eye bolt, on the other hand, is an eye bolt that has not been tested to ensure it meets any regulatory standards and is ideal for low-load applications and is usually less expensive.

Eye Bolts are usually available in screw eye bolts, machinery eye bolts and nut eye bolts, which in turn come in two different styles: plain eye bolts and shoulder eye bolts.

Plain eyebolt is the threaded shank with an eye on it, they should only be used for straight line loads and zero degree lift, if the load is angled the working load limit of the eyebolt will be greatly affected and drop.

Shoulder eyebolt is a shoulder or collar underneath the eye. This eyebolt distributes the lifting force when lifting angled loads and is ideal for lifting objects at an angle. It is important to note that as the angle increases, the load capacity decreases, so it is important to know the WLL of the eyebolt before using it.

Uses of Stainless Eyebolts and nuts

Tying, fastening

Stainless Eyebolts and nuts are fixed to construction and act as attachment points for wire rope, chains and can hold objects in place.

Lifting, hoisting

Stainless Eyebolts and nuts are attached to machines or other loads and then lifted up using sling.

Hanging

Used to hang wire rope or other accessories to attach decorative items or other lighting needs in residential and commercial environments.

The Following Points Need to be Noted While Use Eye Bolts & Nuts

Do not paint or otherwise coat the eyebolt & nut, as this will make it difficult to check for defects or wear due to the masking of the coating.

If you find that the eyebolt & nut is worn or damaged, remove and replace them immediately; wear and damage will significantly reduce the load capacity of the eyebolt. Please also check the eyebolt & nut regularly: whether the eye is bent out of shape; whether the threaded shank is bent, deformed or the threads are worn, corroded or twisted; whether there are scratches, shavings, or visible wear on the surface; whether there are signs that it has been modified in any way, e.g. by heating, cutting, grinding, welding, etc.; whether there are cracks on the surface; whether it lacks sufficient identification marks.

Do not exceed the rated capacity of the eyebolt.

Do not force the sling through the eyebolt; although convenient, this provides an angled lift which will reduce the WLL of the eyebolt.

Do not attach hooks or other accessories directly to the eyebolt, they should be attached to the eyebolt by means of a shackle, please select the appropriate grade of lifting shackle.

Do not rotate the load, this is very dangerous and the twist can damage the eyebolt and accessories, it can also cause the accessories to slip off and pose a danger to personnel and equipment.

The eyebolt should be lifted slowly and gradually, do not shock the load, sudden acceleration of the load or rapid changes in direction can cause a significant increase in load tension.

How To Use Eye Bolts & Nuts?

Always check and clean the eye bolt holes and threads before use, as the receiving holes should be countersunk, so also clean any debris from the receiving holes to ensure the eye bolt is seated correctly.

The shoulder eye bolt must be firmly seated and flush with the mating surface, not at an angle to a flat surface, otherwise, the WLL will be greatly reduced. Washers, spacers and nuts can be used with the shoulder eye bolt to achieve correct load alignment. However, it is important to note that the thickness of the washers and spacers should not exceed one thread pitch.

The shoulder should be installed at right angles to the axis of the hole and the shoulder should be in full contact with the surface of the object being lifted.

Check the coordinates after the angular lift has been applied and if it happens that the first lift causes the bolt to back out of the load, the eyebolt should be unloaded and properly repositioned.

For applications without through holes, it is recommended to use a longer shoulder eye bolt with steel washers and nuts to achieve the required engagement thread length.

The tapped hole of the shoulder eye bolt should have a threaded length to ensure full-length engagement of the shank and clearance of the unthreaded portion, the tapped hole of the plain eye bolt must be threaded for full-length engagement and must also have full-threaded shank engagement, allowing half a turn for proper eyebolt alignment and WLL. The depth of the tapped hole of the screw eye bolt should be at least 1.5 times the diameter of the eyebolt.

The eye bolt should be oriented in line with the sling, if the load is applied laterally the eyebolt will bend.